Extended Guide System for Template-guided Implantation

The Guide System of CAMLOG is used for template-guided preparation of the implant bed and for insertion of CAMLOG® and CONELOG® SCREW-LINE implants after 3D diagnostics and 3D planning. Following its successful launch in the fall of 2008, the CAMLOG® Guide System was first expanded by the CONELOG® SCREW-LINE implants and now continues under the name “Guide System”.

 

The system includes implants with pre-assembled insertion posts as well as laboratory and surgical instruments. All components of the system are matched precisely to one another. Color-coded guide sleeves and single-use surgical instruments enable safe use. Additional sleeves and depth stops are not required. Implant bed depth is prepared incrementally with a guided single-patient drill, and the implant is inserted accurately to the planned depth using the pre-assembled insertion post with guide shaft.

 

The portfolio of the Guide System has been enlarged by CAMLOG® SCREW-LINE Promote® plus implants of a diameter of 3.3 mm and a length of 16 mm. These are now available in the lengths of 9, 11, 13 and 16 mm and diameters of 3.3, 3.8 and 4.3 mm. CONELOG® SCREW-LINE Promote® plus implants are available in the Guide System in lengths of 7, 9, 11, 13 and 16 mm and diameters of 3.3, 3.8 and 4.3 mm.


The existing CAMLOG® Guide System is fully compatible with the new Guide System in terms of surgical application.

 

Planning systems, includinding the new Guide System can be found on the product pages CAMLOG Digital Technology and CONELOG Digital Technology.

 

 

Animation Guide System

 

Do you want to be always up to date with CAMLOG? Then, please, subscribe to our RSS-feed!

 

 RSS Feed CAMLOG Product News

 

All CAMLOG News at a glance.

a perfect fit ™