Wide-ranging prosthetic abutment system

The clearly arranged abutment assortment covers all the requirements of modern implant dentistry and allows solutions of the highest esthetic quality. The CAMLOG^® line of abutments is wide-ranging and efficient structured.

All abutments are color-coded to match the implants. After making the master model, the implant abutment is selected rapidly and without any problem in the dental lab based on color-coded selection abutments. Thus, there is no longer any need for expensive and complicated storage of abutments, either by the dentist or at the prosthodontist or dental laboratory.

Esthomic^® Abutments are used in the fabrication of cementable restorations and are available in both straight and angled versions. The angled version is available in 15° and 20° angles as Type A and Type B and is distinguished by a 60° offset cam.
This makes six rotation positions possible. An optimal prosthesis axis is more easily achieved. The Esthomic^® abutments are available in 15° and 20° angled versions and a straight version. The curved shoulder line, the lower shoulder height, and the anatomical emergence profile allow better esthetics. The color-coded Esthomic^® abutments are available in implant diameters 3.8, 4.3, 5.0 and 6.0 mm in two gingival heights (1.0-1.8 and 3.0-4.5 mm).

      

Gold-plastic abutment The gold-plastic abutments are designed for the fabrication of screw-retained restorations using the direct cast-on technique. They consist of a high gold content cast-on alloy. The abutments are provided with a plastic sleeve that assists in the wax-up. The burn-out plastic sleeves are color-coded to match the implant diameter. They are available in 3.3, 3.8, 4.3, 5.0 and 6.0 mm diameters.

Logfit™ abutment The Logfit™ abutment is used in the fabrication of cement-retained restorations prepared with the help of prefabricated burn-out plastic copings. The color-coded abutment is a component of a standardized prosthetic system and is available in 3.8, 4.3, 5.0 and 6.0 mm diameters and in gingival heights of 0.8 and 1.5 mm.

Telescope abutment The design of the telescope abutment enables the fabrication of double crowns even in heavily unparallel placement of implants. The customizable abutment has an occlusally widened cone angle of 5°. The color-coded telescope abutment is available in 3.8, 4.3, 5.0 and 6.0 mm diameters.

Universal abutment The customizable universal abutment is used in the fabrication of double crowns. The color-coded abutment is available in 3.8, 4.3, 5.0 and 6.0 mm diameters.

Ceramic abutment Ceramic abutments are used whenever particularly high quality esthetics are called for.  Because zirconium oxide is used, the indication is not restricted to the anterior area but extends to the entire dental arch. The ceramic abutment consists of a titanium base, a zirconium oxide sleeve, and an abutment screw. After preparation on the model, the zirconium oxide sleeve is bonded to the titanium base. The procedure enables optimal esthetic results to be obtained and tailored to individual situations by trimming, firing, and tinting the ceramic abutment. Gingiva height is 4.0 mm. The color-coded ceramic abutment is available in implant diameters 3.3, 3.8, 4.3, 5.0 and 6.0 mm.

Esthomic® abutment, Inset The Esthomic® Abutment, Inset, is ideal for narrow gaps through its slender straight shape (no flare). The shoulder is anatomically contoured. The gingival height is 1.5-2.8 mm. The color-coded Esthomic® Abutment, Inset, is available in implant diameters 3.3, 3.8, 4.3, 5.0 and 6.0 mm.

Temporary abutment The temporary abutment consists of a high stability PEEK (polyetheretherketone) resin that is easy to work with in grinding or the application of self-curing polymer. It is especially suited to immediate provisional restorations in addition to long-term provisionals. Gingiva height is 4.0 mm. The Temporary abutment is available in implant diameters 3.8, 4.3, 5.0 and 6.0 mm.

Bar abutment Bar constructions are in many cases the best solution for removable prostheses. The bar abutment offers an extensive choice of fabrication options using prefabricated and custom-milled bars because of the wide variety of secondary components available. Burn-out, cast-on, solderable and laser-weldable bar bases are available for bar abutments. In addition, the Passive Fit System is an option, which consists of a burn-out bar sleeve and a titanium bonding base. This provides the option of fabricating cast bars that are absolutely tension-free. The bar abutment comes in three gingiva heights (0.5, 2.0 and 4.0 mm) and is available in implant diameters 3.3, 3.8, 4.3, 5.0 and 6.0 mm.

Locator® abutment The Locator® abutment is used to securely attach a total denture on implants. It plays the role of male insert and is a component of the Locator® attachment system, which contains different replacement males with different retention strengths. The system can be used with implant divergences of up to 20° per implant (3.3 mm diameter Locator® abutment – up to 10° divergence per implant). The Locator® abutments are available for implant diameters 3.3 mm in three gingival heights (1.0, 2.0 and 3.0 mm), and for implant diameters 3.8, 4.3 and 5.0 mm in four gingival heights (1.0, 2.0, 3.0 and 4.0 mm).

Ball abutment The ball abutment is composed of a ball-shaped male part and a matrix CM Dalbo®-Plus (Cendres & Métaux SA, Biel, Switzerland). The retention strength of the matrix is adjustable in steps from “weak“ to “strong“ through the lamella retention insert. This makes the ball abutment eminently suitable for implant retained full dentures. If necessary, the lamella retention insert can be simply replaced by screwing out. The gingiva heights are 1.5 mm, 3.0 mm and 4.5 mm. The ball abutment is available in implant diameters 3.3, 3.8, 4.3 and 5.0 mm.