Partner Magazine logo 10

24 PRODUCTS CONELOG ® TITANIUM BASES CAD/CAM – CONELOG ® SCANPOSTS The CONELOG ® Titanium bases CAD/CAM serve as the adhesive abutment for the individual fabrication of mesostructures and suprastructures made of suitable dental restoration materials. To expand the range of applications, the new CONELOG ® Titanium bases CAD/CAM, the modeling aids and the abutment and lab screws, are adapted in their geometry to accept the Sirona inCoris meso blocks. Consequently, the CONELOG ® modeling and bonding aids have also been modified. For the CONELOG ® Titanium bases CAD/CAM there are now dedicated special abutment and lab screws. To facilitate classification, the abutment screw that is supplied with the CONELOG ® Titanium base CAD/CAM is dark purple anodized. The brown lab screw receives a titanium colored screw head. Changes to the CONELOG ® Titanium bases CAD/CAM In order that the abutment and lab screws from the CONELOG ® Titanium bases CAD/CAM pass through the pre-milled screw access channel of the sintered inCoris meso blocks, the diameter of the screw head is minimally reduced. The new CONELOG ® Titanium bases CAD/CAM, available in two gingival heights, received new article numbers and are packaged with the new abutment screw and are delivered packaged in a bonding aid with reduced diameter. Please note that the new abutment and lab screws are only used in association with the CONELOG ® Titanium bases CAD/CAM. CONELOG ® Titanium base CAD/CAM (new article number) Art. No.: C2242.3308; C2242.3808; C2242.4308; C2242.5008 Art. No.: C2242.3320; C2242.3820; C2242.4320; C2242.5020 CONELOG ® ScanPost for Sirona Art. No.: C2620.3306; C2620.3806; C2620.4306; C2620.5006 CONELOG ® Abutment screw for titanium base CAD/ CAM (packaged with the titanium base CAD/CAM) Art. No.: C4015.1601; C4015.2001