Partner Magazine logo 10

25 PRODUCTS As the screw channel of the model aids have also been tapered, these also received a new order number. The outer configuration of the titanium bases CAD/CAM and the modeling aids remain unaffected by the changes. CONELOG ® ScanPost for Sirona The new CONELOG ® ScanPosts were developed to optimize the intraoral impression with Sirona Scanbodies. They have been available since 2014. The ScanPosts are connecting elements for intraoral and extraoral use of CONELOG ® Implants and lab analogs with the Scanbodies available from Sirona. To cater for individual soft tissue situations, the new CAMLOG ScanPosts offer approximately 5.5 mm intermediate clear- ance. The combination of the Sirona Scanbody and the CONELOG ® ScanPost allows digital recording of the implant position in relation to the remaining teeth and the soft tissue. A ScanPost is only screwed to an implant or lab analog with the corresponding abutment screw for the purpose of optical image capture. The Scanbody is attached after screwing in the post. The precise positioning of the Scanbodies is both tactile via the nose on the base, as well as visually via a marking on the post. The ScanPosts, including the abutment screws, can be sterilized and are available for all implant diameters of the CONELOG ® Implant system. With the CONELOG ® Titanium bases CAD/CAM in combination with the Sirona Scanbodies, digital impressions and computer-supported fabrication of individual and high precision zirconium oxide ceramic abutments continue to be possible for CONELOG ® Implants. Owing to the low gingival height of the titanium bases (0.3 mm) and an overall design height of five millimeters, a high gingiva may lead to overlap of the scan pyramid. With the aid of the new ScanPosts (intermediate clearance 5.5 mm) exact digital recording of the three-sided pyramid is possible. The Scanbodies are available from the distribution partners of Sirona Dental Systems GmbH. They are available separately in corresponding connecting sizes for the current intraoral Sirona camera systems, CEREC Omnicam or CEREC Bluecam Scan. CONELOG ® Modeling aid (new article number) Art. No.: C2242.3302; C2242.3802 C2242.4302; C2242.5002 CONELOG ® Lab screw for titanium base CAD/CAM Art. No.: C4016.1601; C4016.2001 CONELOG ® Bonding aid (packaged with the titanium base CAD/CAM)