Partner Magazine logo 11

PRODUCTS 24 CAMLOG ® TEMPORARY ABUTMENTS MADE FROM TITANIUM The CAMLOG ® Implant System portfo- lio will be further expanded in May 2015 with the inclusion of temporary titanium abutments. CAMLOG ® Temporary Abut- ments are made of a Ti6AL4Va titanium al- loy and are intended for use in single-tooth restorations in both the posterior and the anterior regions. They can be shortened occlusally, individually veneered with com- posite, and screwed directly into the implant. The temporary abutments are suitable for immediate restorations or are used after the implant exposure for an esthetic, temporary reconstruction of CAMLOG ® SCREW-LINE and CAMLOG ® ROOT-LINE 2 implants. One of the advantages of immediate implantation of an esthetic, non-functional immediate restoration, particularly in the esthetically critical area, is that the structures of the peri-implant hard and soft tissues are preserved. The color-coded temporary abutment is supplied with a CAMLOG ® Abutment screw and has a prosthetic height of 12.0 mm. The abutment screw is tightened by hand using the hex screwdriver. The CAMLOG ® Temporary abutment has a Tube-in-Tube™ Implant-abutment con- nection to the rotation securing device and is color-coded to match the implant diameter. After an adequate healing pha- se for the implant and shaping of the peri- implant soft tissue, another impression is taken for the fabrication of the final resto- ration. The indications for the 3.3-mm diameter temporary titanium abutment are single- tooth restorations in the upper posterior and lower incisor teeth. The temporary titanium abutments are not suitable for splinted constructions. CAMLOG ® Temporary titanium abutment Diameter: 3.3 mm / 3.8 mm / 4.3 mm / 5.0 mm / 6.0 mm CAMLOG ® Tube-in-Tube ™ Implant-abutment connection Abutment height 12 mm