DEDICAM Product Catalog

23 DEDICAM Product Catalog 2019 DEDICAM one-piece gingiva formers are designed with the original DEDICAM CAD library for gingiva for- mers in the suitable CAD software and the corresponding abutment module. To do this it is necessary to use our scanbodies or iSy multifunctional caps respectively (see pages 14 -16). The screw channel is temporarily sealed with suitable materials. The one-piece gingiva former allows shaping of the soft tissue for transgingival healing or after exposure of the osseointegrated implants. This allows a natural emergence profile to be created. Complex soft tissue management may no longer be necessary. Customized gingiva formers can be designed without a model. To do this, the implant position is recorded with an intraoral scanner and a scanbody. The scanning data are loaded into suitable CAD software to design the gingiva formers there. IMPLANT PROSTHETIC One-piece gingiva formers for CAMLOG and BioHorizons implant systems Material Titanium alloy (Ti6Al4V) Zirconium oxide (only CERALOG gingiva formers) Note All DEDICAM one-piece gingiva for- mers are supplied with an abutment screw packaged non-sterile. CERALOG abutments with the titanium or gold screw selected in the CAD library or order portal. One-piece CAMLOG gingiva formers precision milled or polished, incl. abutment screw Diameters: 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V) , precision milled Material: titanium alloy (Ti6Al4V) , polished CAMLOG ® Implant System precision milled polished One-piece CAMLOG PS gingiva formers* precision milled or polished, incl. abutment screw Diameters: – 3.8 mm 4.3 mm 5.0 mm 6.0 mm Material: titanium alloy (Ti6Al4V) , precision milled Material: titanium alloy (Ti6Al4V) , polished CAMLOG ® Implant System precision milled polished PS: Platform Switching *The PS gingiva formers may only be used with CAMLOG implants with "K article numbers".