DEDICAM Product Catalog

71 DEDICAM Product Catalog 2019 DEDICAM bars for bar abutments can be bonded passively to the titanium bonding bases for bar abutments directly in the mouth. This enables the incorporation of tension-free bars using the tried and tested »Passive- Fit technique«. The bars are fixed to the bar abutments with the bonded titanium bonding bases for bar abutments and the prosthetic screws. The bar abutments are selected according to the gingival height, the implant diameter and the possible implant axis divergences. In the COMFOUR system, abutments with an- gles of 17° and 30° are available for compensating implant axis divergences. The clinician can screw-retain the bar abutments in the implants and take impressions. This avoids irritation of the gingiva during try-in. Bars for bar abutments are designed with the original DEDICAM CAD library for the COMFOUR system (bon- ding bar abutment) and the suitable CAD software with the corresponding module. Scanning is performed exclusively with the scanning caps for CAMLOG/CONELOG bar abutments (see page 16). Unfavorable implant positions/angulations can be compensated by angled bar abutments and the tapered contact surfaces between the bar abutment and the bar. The occlusally screw-retained bar can easily be detatched from the bar abutments for inspection and care. Bars for bar abutments are available from 2 implants. The span width between the implants can be up to 30 mm. The bars can be combined on CAMLOG and CONELOG bar abutments. The bars can be supplied with different bar profiles and various attachments (see pages 74 - 77). COMFOUR Occlusally screw-retained bars »Passive-Fit« for CAMLOG/CONELOG bar abutments Bars for bar abutments with "Passive-Fit” Prosthetic screws and titanium bonding bases for bar abutments are included and charged separately Attachments are charged separately CAMLOG / CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: cobalt chrome alloy precision milled polished Material Titanium alloy (Ti6Al4V) CoCr alloy The surface can be supplied precision milled or polished. Notes It is not necessary to send in the master cast. Prosthetic screws and titanium bonding bases for the platforms selected in the CAD software or in the ordering portal are included and charged separately. Bars for bar abutments with "Passive-Fit” Prosthetic screws and titanium bonding bases for bar abutments are included and charged separately Attachments are charged separately CAMLOG / CONELOG prosthetic platform Ø: | 4.3 mm | 6.0 mm | Material: titanium alloy (Ti6Al4V) precision milled polished