DEDICAM Product Catalog

DEDICAM IMPLANT PROSTHETICS The prosthetic restoration of implants is one of CAMLOG's core competences. The declared goal is to achieve the best pos- sible quality of results and to create the Optimum conditions for this. The DEDICAM CAD libraries are an ele- mentary part for ensuring the fit of im- plant-prosthetic constructions. These are matched to the CAMLOG ® , CONELOG ® , iSy ® and BioHorizons ® Internal Implant Systems as well as other systems from leading manufacturers. With DEDICAM, CAMLOG provides you with custom-made products in CAMLOG quality. DEDICAM offers different solutions for the direct restoration of implants. Cus- tom-made one-piece abutments made of titanium alloy (Ti6Al4V) are available, as are mesostructures made of ceramic materials, which you can combine to a two-piece abutment with a titanium base CAD/CAM. Anatomical crowns for titani- um bases are an esthetic alternative in the case of suitable implant positioning. For this type of restoration one can choo- se between the IPS e.max CAD, IPS e.max ZirCAD materials as well as Telio CAD for temporary restorations. An individual gingiva former is a suitab- le solution for designing the emergence profile effectively as well as time and cost-saving. In the fully digital workflow, this gingiva former can also be used in- traoperatively or after exposure of the healed implants to avoid elaborate soft tissue management if applicable. Primary splinting of several implants can be achieved with directly screw-retained implant bridges and bars. These are oc- clusally screw-retained directly on the implant shoulder. Divergences in implant angulations are compensated with the aid of modified implant connection geomet- ries. Alternatively, bridges and bars can be screw-retained occlusally onto prefa- bricated bar abutments or multi-unit ab- utments. For the construction of occlusally screw- retained bridges and bars on implant shoulders or abutments, the model is re- measured with high-precision scanners and the scan data combined with the CAD data, if you so wish. Consequently, possible inaccurarcies of the laboratory scanner can be compensated. Titanium bonding bases are available for CAMLOG and CONELOG bar abutments. Bridges and bars for these bonding bases are bonded in the mouth. This proven »Passive-Fit technique« ensures a tension-free fit of the construction and thus perfect preci- sion. Indication-relevant implant bridges and bars are available made of CoCr, ti- tanium alloy, IPS e.max ZirCAD and Telio CAD. The implant bridges can be venee- red with suitable ceramics or plastics, depending on the material. The one-piece abutments, one-piece gingiva formers and directly screw-retained bridges and bars are supplied with abutment screws, CAMLOG and BioHorizons structures on titanium bases with the titanium bases and restorations on bar and multi-unit abutments with prosthetic screws and, if necessary, titanium bonding bases. The DEDICAM CAD libraries allow the design of implant-prosthetic restorations under consideration of material-specific properties. This adds to the safety and du- rability of the product. 8 DEDICAM Product Catalog 2019