CAMLOG and Science

CAMLOG&Science – Chapter 1 4 | 5 The CONELOG ® (patent pending) connection con- sists of a coronal 1.5 to 1.9mm long, self-locking 7.5° taper for reliable transfer of forces and torques fol- lowed by a short cylindrical seg- ment with three symmetrically arranged grooves. The grooves of the implant fit perfectly in the corresponding cams of the abut- ment enabling precise abutment positioning. CONELOG ® Implant System CAMLOG ® Implant System Implant system Geometry Implant Machined surface at implant neck Surgical drill sequence Platform switching Implant-abutment connection Prosthetics Rough enossal surface CAMLOG ® SCREW-LINE AND CONELOG ® SCREW-LINE IMPLANTS: SIMILARITIES AND DIFFERENCES CAMLOG ® SCREW-LINE Promote ® 1.4 mm Conical, threaded screw with cylindrical neck The state-of-the-art, sand-blasted, acid-etched Promote ® surface favors rapid and stable osseointegration. Evidence for this derives from cell culture experiments, animal studies and clinical trials. Different magnifications of scanning electron microscopy pictures of the Promote ® surface Due to the identical geometry of all three implant types, one surgical kit and an identical surgical drill sequence can be used. Platform-switched or non-platform-switched restoration possible The Tube-in-Tube™ (patented) connection contains co- ronal a 1.9 mm long cylindrical tube with three symme- trically arranged grooves followed by a smaller cylindri- cal longer tube. When inserting the abutments, their tubular extension towards the apex affects the simple, easy and safe orientation in the longitudinal axis of the implant before the three cams lock into the grooves of the implant. By rotation, the correct abutment position is easy to find. The CAMLOG ® Tube-in-Tube™ connection was subject of intensive research and comparative studies with other well-known implant sys- tems demonstrating above average results for fitting accuracy and leakage prevention for the Tube-in-Tube™ connection. Only platform-switched restoration possible CAMLOG ® SCREW-LINE Promote ® plus 0.4 mm CONELOG ® SCREW-LINE Promote ® plus no Tab. 1: Similarities and differences of the CAMLOG ® and CONELOG ® Implant Systems 20 μm 5 μm Small prosthetic units, CAD/CAM based restorations, intraoral bonding to obtain passive fit, passive fit bar technology, and high-precision adaptation of the secondary parts for electroplated telescopic crowns are all standard with the CAMLOG ® and CONELOG ® Implant Systems.