CAMLOG Bite Registration Posts

Bite registration posts for CAMLOG ® implants BITE REGISTRATION POSTS FOR CAMLOG ® IMPLANTS INTRODUCTION Color-coded bite registration posts are available for all CAMLOG implant diameters for accurate implant-supported measurement of jaw relations and their transfer to the cast situations. The posts include a bite registration cap and an integrated fixing screw. There are two options for bite taking: s¬ /PTION¬! ¬"ITE¬REGISTRATION¬WITH¬MOUNTED¬BITE¬REGISTRATION¬CAPS s¬ /PTION¬" ¬"ITE¬REGISTRATION¬WITH¬SPLINTED¬BITE¬REGISTER¬WITHOUT¬CAPS The bite registration posts have a prosthetic height of 8.1 mm and are sui- table for limited occlusal space conditions. A shortened post/implant con- nection in comparison to the Tube-in-Tube™abutment connection and the impression posts make the use of splinted bite registration posts with im- plant abutment divergences of up to 20° possible. The bite registration posts are tapered apically in area of the shoulder sup- port and are therefore suitable for the platform switching option (not for implant diameter 3.3 mm). Prosthetic height 8.1 mm Apical tapering Bite registration post PH: Prosthetic height *Note: The bite registration posts with diameter 3.8/4.3/5.0/6.0 mm can also be used for the platform switching option. Shortened post/implant connection BITE REGISTRATION POSTS FOR CAMLOG ® IMPLANTS REPLACEMENT BITE REGISTRATION CAP Art. No. J2112.3300 J2112.3800 J2112.4300 J2112.5000 J2112.6000 For implant diameters 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm Bite registration posts incl. fixing screw and bite registration caps Bite registration cap (5 units) IMPORTANT NOTE All components for implant-supported bite registration on CAMLOG ® implants are for single use only and must not be modified. BITE REGISTRATION POSTS INCL. BITE REGISTRATION CAPS Art. No. J2140.3300 J2140.3800* J2140.4300* J2140.5000* J2140.6000* For implant diameters 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm PH 8.1 mm 8.1 mm 8.1 mm 8.1 mm 8.1 mm