CAMLOG Bite Registration Posts

4 | 5 Bite registration posts for CAMLOG ® implants Fixing screw extracted to the stop position Once the register has been created, it is inserted in the mouth, a screwdriver (hex) used to hand-tighten the fixing screw and the occlusion checked. Registration of the habitual jaw relations requires only standard materials. Loosen the fixing screws after curing. To safely remove the bite register, extract the screws from the posts to the stop position. Remove the bite register with the integrated bite registration posts and give to the dental laboratory. Mount the bite register with integrated bite registration posts on the lab analogs in the cast and screw on. Connect the bite register to the opposing jaw cast and mount the casts in an articulator. TIP: If bite registration posts cannot be used due to limited space condi- tions (to prevent bite elevation), a 6.0 mm healing cap cylindrical may be used. Record the diameter, position, and height of the healing cap on the information work sheet and deliver it with the corresponding healing cap to the dental laboratory.