Work Instruction GUIDE-SYSTEM

Guide System 27 Removal of insertion post and template Pull the torque wrench or angled hand piece and the driver off the inser- tion post, use the screwdriver, hex, to loosen the insertion post fixing screw and extract the insertion post. NOTE In case of soft bone conditions (e.g. 3* and 4*), the insertion post should be fixed with the driver before loosening the fixing screw with the screwdriver, hex, long, manual/wrench. For that purpose, the screwdriver is inserted into the fixing screw from above through the driver. The drilling template can now be removed. * see [A] in section «Further documentation», page 32