CAMLOG Hybrid Restorations

17 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM CAMLOG ® BITE REGISTRATION POSTS INTRODUCTION Color-coded CAMLOG ® bite registration posts are available for all CAMLOG implant diameters for accurate implant-supported measurement of arch re- lations and their transfer to the cast situations. The posts include a bite reg- istration cap and an integrated fixing screw. There are two options for taking the bite registration: • Option A. Bite registration with mounted bite registration caps • Option B. Bite registration with splinted bite register without caps The CAMLOG ® bite registration posts have a prosthetic height of 8.1 mm and are suitable for limited occlusal space conditions. A shortened post/ implant connection in comparison to the abutment and impression post connection make the use of splinted bite registration posts with implant abutment divergences of up to 20° possible. The CAMLOG ® bite registration posts are tapered apically in the area of the shoulder support and are also suitable for the platform switching option (not for implant diameter 3.3 mm). Prosthetic height 8.1 mm Apical tapering CAMLOG ® Bite Registration Post PH: Prosthetic height *Note: The bite registration posts with diameter 3.8/4.3/5.0/6.0 mm can also be used for the platform switching option. Shortened post/ implant connection Bite registration cap (5 units) IMPORTANT NOTE All components for implant-supported bite registration on CAMLOG ® implants are for single use only and must not be modified. CAMLOG ® bite registration post incl. fixing screw and cap CAMLOG ® BITE REGISTRATION POST INCL. BITE REGISTRATION CAP Art. No. J2140.3300 J2140.3800* J2140.4300* J2140.5000* J2140.6000* For implant diameters 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm PH 8.1 mm 8.1 mm 8.1 mm 8.1 mm 8.1 mm REPLACEMENT BITE REGISTRATION CAP Art. No. J2112.3300 J2112.3800 J2112.4300 J2112.5000 J2112.6000 For implant diameters 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm