CAMLOG Hybrid Restorations

31 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM TRIMMING After devestment and cleaning of the cast, the internal fixation edges (screw seat) are removed from the bar sleeves with a round bur (Ø 2.4 mm). The prosthetic screw must slide lightly through the bar sleeve. The final screw seat is on the titanium bonding base. After trimming, prosthetic screws are used to attach the titanium bonding bases on the cast. The bar is placed on the titanium bonding bases and the fit checked. If the bar is seated tension-free on the cast at the try-in, it can then be bonded to the titanium bonding bases. BONDING THE CAST BAR TO THE TITANIUM BONDING BASES After completing the bar framework, the CAMLOG ® bar abutments are transferred from the cast to the implants and screwed in by hand. The titanium bonding bases are placed on the CAMLOG ® bar abutments and with the prosthetic screw, screwed on by hand. Cast bar construction Checking the screw mobility Insertion of CAMLOG ® bar abutments Placing the titanium bonding bases Removing the screw seat Fit of the bonding base