CAMLOG Hybrid Restorations

35 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM INSERTING THE BAR CONSTRUCTION The CAMLOG ® bar abutments are transferred from the working cast to the CAMLOG ® implants and screwed in with the prescribed torques. The finished bar construction is transferred to the CAMLOG ® bar abutments and fixed with new unused prosthetic screws, using a screwdriver (hex) with 15 Ncm. The newly created full denture is then inserted and checked for proper fit. SOLDERED BAR CONSTRUCTION BASE FOR BAR ABUTMENT, SOLDERABLE Soldered bar construction with prefabricated bar bases made of solderable gold alloy. A prosthetic screw for bar abutment (hex) is used to fix the bar base on the CAMLOG ® bar abutment. The height of the bar base is 5.3 mm. EXAMPLE: WORKING CAST WITH SOLDERING AIDS/BAR LAB ANALOGS FOR BAR ABUTMENT (STAINLESS STEEL). The bar elements are cut accordingly and in consideration of a joining gap that is as small as possible fitted between the bar bases. The bar compo- nents are mounted to residue-free burn-out plastic, the prosthetic screws loosen after curing and the bar lifted off the cast. Soldering aids/lab ana- logs (stainless steel) are inserted in the bar bases and hand tightened with screws, hex, for bar abutments (thread M1.6 for Ø 3.3/3.8/4.3 mm; thread M2.0 for Ø 5.0/ 6.0mm; stainless steel. With the bar prepared for soldering, a soldering model is fabricated in the conventional manner. NOTE The instruction manuals of the soldering material manufactures must be observed! Base for bar abutment, solderable Setting up the solderable bar bases Fixed bar components Bar bases with fitted prefabricated bar components made of solderable gold alloy Soldering aids/lab analogs with bar and screws, hex, for bar abutment