CAMLOG Hybrid Restorations

38 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM PREPARING AND FABRICATING THE RELINING MODEL The soldering aid/bar lab analog that fits is selected based on the diameter used. It is inserted into the bar base and holds with the friction of the hold- ing pin for bars. Ensure the proper fit of the soldering aid/bar lab analog in the bar base. Also use sticky wax or similar to hold the soldering aid/bar lab analog if necessary. The relining model is then fabricated in the usual way. RELINING After fabricating the relining model, the bar is placed on the model and at- tached with prosthetic screws for bar abutments. The areas underneath are blocked out. The relining is then finished in the usual way based on the procedure for relining a bar-supported prosthesis. REPLACING THE BAR AND PROSTHESIS The bar is fixed in the patient's mouth using unused prosthetic screws for bar abutments. The bar is inserted and the prosthetic screws are tightened to the specified torque of 15 Ncm. The prosthesis is then inserted and checked for proper seating and occlusion. Holding pin for bar, bar base, soldering aid/bar lab analog BAR RESTORATIONS