CAMLOG Hybrid Restorations

42 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM BALL ABUTMENT ANALOG, incl. stabilizing ring Art. No. J3015.3300 J3015.3800 J3015.4300 J3015.5000 Implant Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm SETTING THE RETENTION FORCE With the lamella retention insert at maximum, the retention force is approx- imately 1200 g. The force is approximately 200 g on delivery. The force can be regulated by screwing the activator in and out. CAMLOG ® IMPRESSION TAKING OPTIONS After successful implant insertion, the impression can be taken in two ver- sions: Impression taking over CAMLOG ® implant shoulder for fabrication of a new ball-retained full denture: Impression taken over the CAMLOG ® implant shoulder directly with CAMLOG ® impression post, open or closed tray, before insertion of CAMLOG ® ball abutments for fabrication of a new prosthesis. The cast is then fabricated with CAMLOG ® lab analogs. See also CAMLOG ® cast fabri- cation on page 13–15. Further information is available in the working in- struction "Impression Taking, Bite Registration and Temporary Restoration on CAMLOG ® Implants", Art. No. J8000.0065. We recommend impression taking open tray because it can be combined with a functional impression to fabricate an extension prosthesis. Impression taking over CAMLOG ® ball abutments for broadening of an existing full denture into a ball abutment-retained prosthesis and/or for relining impression taking of an existing ball abutment-retained full denture: Direct impression taking over the CAMLOG ® ball abutments. The cast is then fabricated with the ball abutment analog. The ball abutment analog is avail- able for implant diameters 3.3/3.8/4.3/5.0 mm incl. stabilizing ring. The special thread of the slotted lamella retention insert is slightly tapered when turning in to prevent accidental misadjustment. IMPORTANT NOTE The lamella retention insert must never extend out of the housing (see arrows), otherwise it may come loose and the matrix will be lifted. Lamella retention insert screwed all the way in Activation/Deactivation Lamella retention insert screwed all the way out BALL ABUTMENT ANCHORING SYSTEM