CAMLOG Hybrid Restorations

54 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM LOCATOR ® INSTRUMENTS Art. No. Article Locator ® parallel post Locator ® angle measurement guide Driver for Locator ® abutment, manual/wrench Locator ® instrument, threepart J2253.0004 J2253.0003 J2253.0001 J2253.0002 LOCATOR ® INSTRUMENT The Locator ® instrument consists of three parts screwed together. To re- move a processing replacement male or a replacement male, the screw-on tip is loosened three turns counter-clockwise and introduced into the male. When removing, the male is held by the sharp retention edge of the tip. To remove the male from the tip, it is tightened again clockwise on the instru- ment. Manufacturer Locator ® : Zest Anchors, Inc. Escondido, CA 92029, USA Locator ® is a registered trademark of Zest Anchors, Inc. To introduce a processing replacement male or a replacement male into the titanium housing, the middle piece of the Locator ® instrument is used. The tip is unscrewed. The required male is positioned on the now visible end and pushed completely into the titanium housing. The gold-colored endpiece can also be unscrewed and can be used as to tighten the CAMLOG ® Locator ® abutment. Retentive tip for removing males Middle piece for repositioning males Gold-colored endpiece (abutment turning aid) LOCATOR ® ANCHORING SYSTEM