CAMLOG Hybrid Restorations

6 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM CAMLOG ® IMPLANT ABUTMENT CONNECTION Various CAMLOG ® abutments for anchoring of an implant-retained full denture with varying geometries are available for the CAMLOG ® Implant System. The abutments differ in the apical area with two different types of connection. CAMLOG ® BAR, BALL AND LOCATOR ® ABUTMENTS CAMLOG ® bar, ball and Locator ® abutments have a thread in the apical area that engages the upper respectively lower (for implants with Ø 3.3 mm) inner thread of the CAMLOG ® lab analog respectively CAMLOG ® implant. The abutments are screwed into the CAMLOG ® implant with a defined torque using the corresponding drivers and close flush with the implant shoulder. Due to the design of the screw connection, the abutments do not have cams. Example: CAMLOG ® ball abutment (Ø 4.3 mm) in a CAMLOG ® SCREW-LINE implant CAMLOG ® Bar Abutment CAMLOG ® Ball Abutment CAMLOG ® Locator ® Abutment SYSTEM INTRODUCTION CAMLOG ® implant Lower inner thread Upper inner thread Screw-retained CAMLOG ® abutment