CAMLOG Hybrid Restorations

69 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM CAMLOG ® GOLD-PLASTIC ABUTMENT The CAMLOG ® gold-plastic abutment consists of a prefabricated cast-on base part made of a non-oxidizing, high-melting cast-on gold alloy and a screw channel made of burn-out plastic (POM). The screw channel repre- sents a modeling aid and ensure a clean finish of the screw channel. The screw channel is color-coded, firmly connected to the base part and can be individually shortened occlusally. The CAMLOG ® gold-plastic abutment with the cast-on technique can be used to fabricate primary pillars for bridging implant axis divergences in the double crown technique. The color-coded CAMLOG ® gold-plastic abut- ments are available in diameters 3.8/4.3/5.0/6.0 mm incl. CAMLOG ® abut- ment screws. NOTE The CAMLOG ® gold-plastic abutment with Ø 3.3 mm is not suitable for double crown restorations. The high-melting cast-on gold alloy is only suitable for the cast-on proce- dure with high-gold alloys. PROCESSING THE CAMLOG ® GOLD-PLASTIC ABUTMENT MODIFICATION OF THE SCREW CHANNEL After fabricating the cast, the CAMLOG ® gold-plastic abutments are in- serted into the CAMLOG ® lab analogs and fixed with the CAMLOG ® lab screw. A previously prepared silicone index is used to mark the required height on the plastic sleeve. The height of the circular functional surface must not fall below 5 mm, otherwise sufficient retention strength of the construction cannot be achieved. Gold-Plastic Abutment Screw channel made of burn-out plastic (POM) Base part made of high-melting cast-on gold alloy CAMLOG ® GOLD-PLASTIC ABUTMENT Art. No. K2246.3800 K2246.4300 K2246.5000 K2246.6000 Noble metal weight approx. 0,46 g approx. 0,65 g approx. 0,81 g approx. 0,89 g