CAMLOG Impression-Taking

Impression-taking, Bite Registration, and Temporary Restoration on CAMLOG ® Implants 4 | 5 IMPRESSION-TAKING IMPRESSION-TAKING OF CAMLOG ® IMPLANTS INTRODUCTION The CAMLOG ® impression-taking system provides a highly precise, rotation- resistant transfer system for both closed and open tray methods. All system components are color-coded by implant diameter. It must be made sure that only implants and impression-taking components of the same diameter (by color-coding) aremixed andmatched. No components of different diameters should be attached to one another. The system components must not be modified. IMPRESSION-TAKING METHODS The open or closed tray method may be selected for impression-taking. If heavily divergent implant axes are present, or combination with a func- tional impression-taking is desired, the open impression-taking method should be used. For the use of the Logfit ® prosthetic system, the ball abut- ments and Locator ® abutments, or a prefabricated bar, special matching impression posts are available. IMPRESSION-TAKING MATERIAL Silicone or polyether materials can be used as impression-taking materials for the open and closed impression-taking methods. IMPRESSION-TAKING COMPONENTS WITH K ARTICLE NUMBERS (K-SERIES) – ROUND BECOMES SQUARE The new SCREW-LINE Implants with K article numbers (K-Series) include an inner groove configuration making the platform switching option available to the user. The geometry of the three grooves was changed from round to square and shortened. Because of this change, all impression posts, open and closed trays, and impression posts PS also include square cams and K article numbers (K-Series). Shortened cams K-Series All impression posts with K article numbers are compatible with all CAMLOG ® Implant lines.