CAMLOG SCREW-LINE Surgical procedure

5 CAMLOG ® SCREW-LINE IMPLANT IMPLANT DIMENSIONS * IMPORTANT NOTE CAMLOG ® Implants with a diameter of Ø 3.3 mm. These are an alterna- tive in cases where the alveolar ridge width is only 5–6 mm. Because of their lower mechanical strength compared with larger diameter implants, they should only be used under the following conditions: • As single implants, they should be used only to replace mandibular incisors and/or maxillary lateral incisors. • Edentulous mandibles can be prosthetically restored with a barsplinted restoration consisting of at least four implants Ø 3.3 mm without distal extensions. • Implants of Ø 3.3 mm are suitable for a partially edentulous arch when combined with implants of larger diameter for splinted superstructures. However, the limited strength of the implants with Ø 3.3 mm must be taken into account. • Avoid excessive mechanical stressing of the implants when using ball abutments in combination with Ø 3.3 mm implants. • The healing time for Ø 3.3 mm implants is at least 12 weeks. • Double crown constructions are not allowed on Ø 3.3 mm implants. Article Art.-No. L A CAMLOG ® SCREW-LINE Implant, Promote ® incl. insertion post and cover srew, sterile Material Titanium Grade 4 K1044.3311* 3.3 mm 11 mm 2.7 mm K1044.3313* 13 mm K1044.3316* 16 mm K1044.3809 3.8 mm 9 mm 3.5 mm K1044.3811 11 mm K1044.3813 13 mm K1044.3816 16 mm K1044.4309 4.3 mm 9 mm 3.9 mm K1044.4311 11 mm K1044.4313 13 mm K1044.4316 16 mm K1044.5009 5.0 mm 9 mm 4.6 mm K1044.5011 11 mm K1044.5013 13 mm K1044.5016 16 mm K1044.6009 6.0 mm 9 mm 5.5 mm K1044.6011 11 mm K1044.6013 13 mm K1044.6016 16 mm CAMLOG ® SCREW-LINE Implant, Promote ® plus incl. insertion post and cover srew, sterile Material Titanium Grade 4 K1054.3311* 3.3 mm 11 mm 2.7 mm K1054.3313* 13 mm K1054.3316* 16 mm K1054.3809 3.8 mm 9 mm 3.5 mm K1054.3811 11 mm K1054.3813 13 mm K1054.3816 16 mm K1054.4309 4.3 mm 9 mm 3.9 mm K1054.4311 11 mm K1054.4313 13 mm K1054.4316 16 mm K1054.5009 5.0 mm 9 mm 4.6 mm K1054.5011 11 mm K1054.5013 13 mm K1054.5016 16 mm K1054.6009 6.0 mm 9 mm 5.5 mm K1054.6011 11 mm K1054.6013 13 mm K1054.6016 16 mm L L A A Note: The implant length (L) is the distance from the apical curve to the machined shoulder surface of the implant. A Ø: Apical diameter (mean value) 1.4 mm 0.4 mm