CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS 12 | 13 APPLICATION SELECTION AND INSERTION OF THE CAMLOG ® VARIO SR ABUTMENTS The suitable CAMLOG ® Vario SR abutments can be selected depending on the clinical situation for bridge and bar constructions on the patient directly. CAMLOG ® Vario SR abutments are sterile packed incl. the enclosed abut- ment screw. Sterilization of the abutment as recommended before insertion is not required for immediate final integration and when the abutment remains in the implant. SELECTING ANGLED CAMLOG ® VARIO SR ABUTMENTS WITH THE ALIGNING TOOLS 20°/30° After inserting the implant, the Vario SR 20° and 30° aligning tools can be used when multiple implants are placed to check the respective insertion direction and alignment of the implant grooves before inserting the CAMLOG ® Vario SR abutments. The respective aligning tool is simply placed over the insertion post attached to the implant. If necessary, the user can slightly adjust the alignment of the grooves of the inner implant config- uration. The angle of the Vario SR aligning tools is identical to the 20° and 30° angled CAMLOG ® Vario SR abutments. Vario SR aligning tool and angled Vario SR abutment 30° Vario SR aligning tool and angled Vario SR abutment 20° Vario SR aligning tool 30° Vario SR aligning tool 20° Vario SR aligning tool The angle points in the opposite direction of the implant groove. 2 chamfer = 20° 3 chamfer = 30° Insertion post Implant IMPORTANT NOTE The products must always be protected from the risk of aspiration during intraoral use.