CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS OPTIONS FOR IMPRESSION-TAKING For bridge and bar constructions, the impression can be taken using Vario SR impression caps, open and/or closed tray, over the CAMLOG ® Vario SR abutment already in its final position. For single crown restorations, the im- pression is taken using the CAMLOG ® impression posts and/or closed tray on the CAMLOG ® implant shoulder directly. METHODS OF IMPRESSION-TAKING, OPEN AND CLOSED TRAY Components for the open or closed tray method are available for impres- sion taking. If heavily divergent implant axes are present or combination with a functional impression-taking is desired, the open impression method should be used. Never modify the system components. Only implants, abut- ments and impression components of the same diameter may be used together. IMPRESSION-TAKING FOR VARIO SR BRIDGE AND BAR CONSTRUCTIONS After final fixation of the CAMLOG ® Vario SR abutments in CAMLOG ® implants, the impression is taken using the Vario SR impression cap, open or closed tray, directly over the abutment shoulder. NOTE Vario SR impression caps, open and closed tray, have no antirotational mechanism and therefore are only suited for impression-taking directly over Vario SR abutments for bridge and bar constructions. IMPRESSION MATERIAL Silicone or polyether materials are suitable for the open and closed impres- sion-taking methods. NOTE The fixing screws of the CAMLOG ® impression posts and the Vario SR impression caps, open tray, as well as the Vario SR impression cap, closed tray, may only be tightened by hand! ART. NO. ARTICLE FOR IMPLANT DIAMETERS J2566.4300 Vario SR impression cap, open tray, incl. fixing screw 3.8/4.3 mm J2566.6000 Vario SR impression cap, open tray, incl. fixing screw 5.0/6.0 mm J2565.4300 Vario SR impression cap, closed tray 3.8/4.3 mm J2565.6000 Vario SR impression cap, closed tray 5.0/6.0 mm