CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS 16 | 17 The Vario SR impression cap, open tray, is placed on the CAMLOG ® Vario SR abutment. The fixing screw must be hand-tightened with the screw- driver. For tight and thick gingiva in particular, we recommend a radio- graphic check of the correct seating of the impression cap prior to taking the impression. The impression is taken using an individual tray with perforations for the fixing screw. Before taking the impression, check the tray for a precision fit. The fixing screws protruding from the perforations must not touch the tray. Then use a silicone or polyether impression material to take the impression. 10.0 mm 3.0 mm Vario SR impression cap, open tray IMPRESSION-TAKING WITH VARIO SR IMPRESSION CAP, OPEN TRAY Vario SR impression caps, open tray, are equipped with an integrated fixing screw and are placed directly on the CAMLOG ® Vario SR abutment. When tightening the fixing screw, the thread engages in the occlusal thread of the angled CAMLOG ® Vario SR abutment or in the head thread of the CAMLOG ® Vario SR abutment screw in straight abutments. The fixing screw has a break-off point in the upper area. With limited occlusal space condi- tions, it can be shortened extra orally by 3 mm by breaking it off with a screwdriver (hex). CAUTION Shorten extra-orally only!