CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS To remove the impression, loosen the fixing screw, pull it back and then lift off the impression. The impression cap remains in the impression. TIP: To simplify the procedure, we recommend also sending the matching Vario SR analog to the laboratory. IMPRESSION-TAKING WITH VARIO SR IMPRESSION CAP, CLOSED TRAY Vario SR impression caps, closed tray, are one-piece, repositionable and are screwed on the CAMLOG ® Vario SR abutments directly. An internal thread engages in the occlusal thread of the angled CAMLOG ® Vario SR abutment respectively in the head thread of the CAMLOG ® Vario SR abutment screw in straight abutments. A prefabricated impression tray is used for the closed impression method. The Vario SR impression cap, closed tray, is screwed onto the CAMLOG ® Vario SR abutment. A prefabricated impression tray is used for the closed impression method. Before taking the impression, check the tray for a pre- cision fit. For tight and thick gingiva in particular, we recommend a radio- graphic check of the correct seating of the impression cap prior to taking the impression. Then use a silicone or polyether impression material to take the impression. After removing the impression, the Vario SR impression cap, closed tray, re- mains on the CAMLOG ® Vario SR abutment. The impression cap is removed and given to the lab together with the impression. TIP: To simplify the procedure, we recommend also sending the matching Vario SR analog to the laboratory. 11.0 mm Vario SR impression cap, closed tray, repositionable