CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS For accurate implant-supported measurement of arch relations and their transfer to the cast situations, Vario SR titanium caps, bridge, are placed on the CAMLOG ® Vario SR abutments in the CAMLOG ® implant and fixed using the Vario SR prosthetic screw. The caps may be shortened occlusally by 5.0 mm (extra-orally) including the third chamfer. POSSIBLE OPTIONS Implant-supported measurement of the arch relations and their transfer to the cast situation may be carried out using the Vario SR titanium caps op- tionally with applied commercial materials for the bite registration or splinted Vario SR titanium caps as a one-piece bite register. EXAMPLE BITE REGISTRATION WITH SPLINTED VARIO SR TITANIUM CAPS After taking the impression and fabricating the cast, the Vario SR titanium caps, bridge, are screwed onto the Vario SR analogs and a bite register splinted with the caps fabricated on the working cast. The Vario SR titanium caps, bridge, are wrapped with a suitable plastic and joined. The Vario SR prosthetic screws must not be covered. TIP: To correct distortion stress with larger restorations (edentulous jaw, large gaps), we recommend disconnecting the register between the caps and then reconnecting in the mouth with suitable plastic after attaching to the CAMLOG ® Vario SR abutments. BITE REGISTRATION ON CAMLOG ® VARIO SR ABUTMENTS 11.0 mm Vario SR titanium caps, bridge, with Vario SR prosthetic screw May be shortened by up to 5.0 mm