CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS 24 | 25 Detailed information about cast fabrication with CAMLOG ® lab analogs is available in the working instruction “Crown and Bridge Restorations with the CAMLOG ® Implant System”, Art. No. J8000.0069. After fabricating the cast, a straight or angled CAMLOG ® Vario SR abut- ment is placed in the CAMLOG ® lab analog based on the clinical situation and fixed by hand using a corresponding brown anodized lab screw (see also page 29). The single crown is fabricated on the original CAMLOG ® Vario SR abutment. CAST FABRICATION FOR SINGLE TOOTH RESTORATIONS WITH THE CAMLOG ® LAB ANALOG If the impression was taken without CAMLOG ® Vario SR abutment on the CAMLOG ® implant shoulder level, the CAMLOG ® lab analog is used for cast fabrication. The CAMLOG ® lab analog is attached to the CAMLOG ® impres- sion post, open or closed tray, and hand-tightened using a screwdriver (hex). NOTE Taking the impression directly over the CAMLOG ® implant shoulder us- ing a CAMLOG ® impression post, open and/or closed tray, requires that the cast be fabricated using a CAMLOG ® lab analog of the same color. CAMLOG ® impression post, open tray CAMLOG ® impression post, closed tray CAMLOG ® LAB ANALOG ART. NO. J3010.3800 J3010.4300 J3010.5000 J3010.6000