CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS 28 | 29 CAMLOG ® VARIO SR ABUTMENT OVERVIEW OPTIONAL FABRICATION OF THE SUPERSTRUCTURE DIRECTLY ON CAMLOG ® VARIO SR ABUTMENTS BROWN ANODIZED LAB SCREWS The superstructure (bridge/bar) can also be fabricated on the CAMLOG ® Vario SR abutment (straight/angled) directly. However, fabrication of a single crown restoration requires fabrication on the original CAMLOG ® Vario SR abutments (see also Impression-taking for Vario SR single crown restoration, page 19). After fabricating the cast with CAMLOG ® lab analogs, the CAMLOG ® Vario SR abutment is set in the CAMLOG ® lab analog. In this case, we rec- ommend the use of a brown anodized lab screw (hex) for fixation of the abutment in the CAMLOG ® lab analog. The abutment screw attached to the abutment is only used for final insertion in the implant. Straight, 20° and 30° angled abutments Lab screws Straight CAMLOG ® Vario SR abutments Ø 3.8/4.3 mm CAMLOG ® Vario SR lab screw M 1.6 Art. No. J4008.1600 Angled CAMLOG ® Vario SR abutments Ø 3.8/4.3 mm CAMLOG ® lab screw M 1.6 Art. No. J4006.1601 Straight CAMLOG ® Vario SR abutments Ø 5.0/6.0 mm CAMLOG ® Vario SR lab screw M 2.0 Art. No. J4008.2000 Angled CAMLOG ® Vario SR abutments Ø 5.0/6.0 mm CAMLOG ® lab screw M 2.0 Art. No. J4006.2001 NOTE CAMLOG ® lab screws are compatible with all CAMLOG ® abutments. CAUTION Only use the matching lab screw type!