CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS 32 | 33 After trimming, the cast object is prepared for ceramic or plastic veneering. The ceramic to be used must be compatible with the alloy (observe heat expansion coefficient). The occlusal surface should be designed based on the “freedom in centric” concept. INSERTION OF THE PROSTHETIC RESTORATION The finished bridge restoration is transferred to the CAMLOG ® Vario SR abut- ments and fixed using the new unused Vario SR prosthetic screws. The tight- ening torque is 15 Ncm. For hygiene and esthetic reasons, we recommend closing the transocclusal screw opening. To ensure that the Vario SR prosthetic screw can be removed again, the screw head is covered with some wax or gutta-percha and the screw channel closed with e.g. composite. Clean and disinfect the prosthetic components prior to insertion. We recom- mend component sterilization (see also the “Preparation Instructions for the CAMLOG ® Implant System”, Art. No. J8000.0032). The peri-implant hard and soft tissue situation must allow gapless insertion of the restoration.