CERALOG Product Catalog 2019

4 | CERALOG ® Product Catalog 2019 THE Y-TZP ZIRCONIUM DIOXIDE MATERIAL CERALOG ® Implants consist of ultra-pure Yttrium stabilized tetragonal zirconium dioxide. They are manufactured by Ceramic Injection Molding (CIM). Here both the outer geometry as well as the surface texture are already created in a mold before the sintering and HIP process (HIP = Hot Isostatic Pressing). No abrasive treatment of the zirconium dioxide is necessary during this process. Only few companies worldwide are capable of managing this high-tech manufacturing process. 100% quality control: every single implant is tested optically, dimensio- nally and with appropriate mechanical loading in a controlled process. MECHANICAL PROPERTIES OF ZIRCONIUM DIOXIDE FROM THE CIM PROCESS COMPARED TO TITANIUM HEXALOBE MONOBLOC 4.0 mm 0 500 1000 1500 2000 Compressive strength (MPa) Tensile strength (MPa) Shear strength (MPa) Modulus of elasticity (GPa) Titanium (Grade 4) Zirconium dioxide (Y-TZP HIP) Internal structure of the zirconium dioxide implant (images: MEB, magnification 6000x) CERALOG ® HEXALOBE AND CERALOG ® MONOBLOC From the implant to the crown: perfect red-white esthetics, like a natural tooth. Choices for therapy planning include the transgingival healing CERALOG ® Monobloc implant as well as the both trans and subgingival healing two-piece CERALOG ® Hexalobe implant. The sophisticated design, the screw-retainable Hexalobe abutments and the optimal combination of the necessary surgical instruments simplify the surgical and prosthetic application of the CERALOG ® Implants. The inherent ivory- like color of zirconium dioxide allows for highly esthetic restorations. The implants are available in three lengths (8, 10 and 12 mm) and one diameter (4 mm). IMPLANT DIAMETER IMPLANT LENGTHS 8 mm 10 mm 12 mm