Work Instruction COMFOUR®

Abutment screw with reduced head, hex, for final fixation of angled bar abutments in the CAMLOG ® or CONELOG ® Implant, titanium alloy (Ti6Al4V ELI) Lab screw with reduced head, hex, for fixation of angled bar abutments in the CAMLOG ® or CONELOG ® Lab analog, titanium alloy (Ti6Al4V ELI) Prosthetic screw for bar abutment, hex, for final fixation of crowns, bridges and bar constructions and for scanning cap*, titanium alloy (Ti6Al4V ELI) Lab prosthetic screw for bar abutment, hex, for fabrication of crowns, bridges and bar constructions and for scanning cap on the bar lab analog, titanium alloy (Ti6Al4V ELI) Prosthetic screw for bar abutment, hex, only for fabrication of the wax-up on the burn-out bar sleeve for titanium bonding base passive-fit on the bar lab analog, titanium alloy (Ti6Al4V ELI) Plastic screw for bar abutment, hex, as fixation and bonding aid, PEEK (Poly ether ether ketone), sterile SCREWS FOR CAMLOG ® AND CONELOG ® BAR ABUTMENTS TYPES OF SCREWS COLOR ART. NO. TIGHTENING TORQUE light blue partial light blue an- odized light blue brown titanium-colored beige CAMLOG ® M1.6/M2.0 J4004.1601/2001 CAMLOG ® M1.6/M2.0 J4004.1600/2000 M1.6/M2.0 J4012.1601/2001 M1.6/M2.0 J4013.1601/2001 M1.6/M2.0 J4005.1602/2002 M1.6/M2.0 J4009.1627/2027 CONELOG ® M1.6/M2.0 C4004.1601/2001 CONELOG ® M1.6/M2.0 C4004.1600/2000 20 Ncm (intraoral) Hand-tight (extraoral) 15 Ncm (intra- oral) *only hand-tight for scanning cap Hand-tight (extraoral) Hand-tight (extraoral) Hand-tight (intra and extra- oral) 8 OCCLUSALLY SCREW-RETAINED PROSTHETICS ON CAMLOG ® AND CONELOG ® BAR ABUTMENTS