Work Instruction COMFOUR®

17 OCCLUSALLY SCREW-RETAINED PROSTHETICS ON CAMLOG ® AND CONELOG ® BAR ABUTMENTS CAMLOG ® IMPRESSION POST, OPEN TRAY ART. NO. K2121.3300 K2121.3800 K2121.4300 K2121.5000 CAMLOG ® IMPRESSION POST, CLOSED TRAY ART. NO. K2110.3300 K2110.3800 K2110.4300 K2110.5000 IMPRESSION TAKING IN THE CAMLOG ® IMPLANT With this method, the impression without bar abutment is taken directly over the CAMLOG ® Implant shoulder, optionally with a color-coded CAMLOG ® Impression post, open or closed tray. The impression posts are equipped with fixing screws and are hand-tightened on the implant using a screwdriver, hex. This impression taking method requires for the cast fabrication the use of a CAMLOG ® Lab analog of the same color. Silicone or polyether materials are suitable for the open and closed impres- sion-taking methods. CAMLOG ® Impression posts, open tray, incl. fixing screw Implant-Ø mm PH mm CAMLOG ® Impression post, closed tray, incl. impression cap, bite registration cap and fixing screw Implant-Ø mm PH mm 3.3 3.3 10.0 10.7 3.8 3.8 10.0 10.7 4.3 4.3 10.0 10.7 5.0 5.0 10.0 10.7 PH: Prosthetic height PH: Prosthetic height