CONELOG impression taking and bite regsitration

9 CONELOG ® IMPRESSION-TAKING AND BITE REGISTRATION 2.0 mm CONELOG ® Impression posts, closed tray with impression caps CLOSED TRAY IMPRESSION-TAKING METHOD The CONELOG ® Impression posts, closed tray, are color-coded, have an internal fixing screw and are delivered with an impression cap and a bite registration cap. A prefabricated impression tray can be used for the closed tray impression-taking method. As an option, bite registration can be performed directly via the impression posts using the bite registration caps. The procedure is identical to that with the CONELOG ® Bite registration posts as described from page 11 onwards. The fixing screw in the CONELOG ® impression post must only be tightened by hand using the screwdriver, hex, both in the CONELOG ® implant as well as in the CONELOG ® Lab analog. CONELOG ® IMPRESSION POST INSERTION After removing the healing cap or the temporary restoration, the impression post (with inserted fixing screw) is inserted into the implant. As you rotate it, you will feel the cams snap into the grooves of the implant. When the impression post is inserted, the fixing screw protrudes approx. 2.0 mm. After tightening the fixing screw, it sits flush with the upper edge of the impression post (4–5 rotations). 10.7 mm