CONELOG impression taking and bite regsitration

3 CONELOG ® IMPRESSION-TAKING AND BITE REGISTRATION CONELOG ® Impression posts, open and closed tray IMPRESSION-TAKING INTRODUCTION CONELOG ® Impression-taking components provide a highly precise, ro- tation-resistant transfer system for both closed and open tray methods. The CONELOG ® Impression posts do not engage with the taper of the CONELOG ® Implant but rather rest on the implant shoulder. This prevents a height displacement when taking the impression. The CONELOG ® Groove/cam connection is the mechanism for the rotation locking. All system parts are color-coded to match the respective implant diameters. It is important to ensure that only implants and impressions components of the specific diameter (color-coding) are used with each other. No com- ponents of differing diameters may be connected with one another. The system parts must not be modified. IMPRESSION-TAKING METHODS, OPEN AND CLOSED TRAY The open or closed-tray methods may be selected to take the impression. The open tray impression-taking method should be used in cases where implant axes diverge acutely or in combination with a functional impres- sion-taking. IMPRESSION-TAKING MATERIAL Silicone or polyether materials can be used as impression-taking mate- rials for the open and closed impression-taking methods. NOTE The impression-taking from CONELOG ® SCREW-LINE implants can only be made using CONELOG ® Impression posts, open and/or closed tray.