CONELOG impression taking and bite regsitration

6 CONELOG ® IMPRESSION-TAKING AND BITE REGISTRATION IMPRESSION-TAKING CONELOG ® Impression posts, open tray 10.0 mm OPEN-TRAY IMPRESSION-TAKING METHOD The open-tray impression-taking method requires a custom-made impres- sion tray that is perforated for the protrusion of the fixing screw extend- ing from the implant axis. The fixing screw is secured in the CONELOG ® Impression post with an O-ring and must only be tightened by hand using the screwdriver, hex, both in the CONELOG ® Implant as well as in the CONELOG ® Lab analog. O-ring 3.0 mm O-ring NOTE Before removing the impression, the loosened screw must be withdrawn until you can feel the limit stop (O-ring). Otherwise the axis divergences of the implant can make removing the impression difficult or can deform the impression due to the high compression. Impressions can be taken with implant axis divergences of up to 20°­ (10° for each CONELOG ® Implant). The fixing screw is equipped with a predetermined breaking point. If space limitations are encountered, it can be shortened by 3.0 mm by breaking it off with a screwdriver, hex. Caution: Shorten extra-orally only!