CONELOG PROGRESSIVE-LINE Surgical procedures

20 CONELOG ® PROGRESSIVE-LINE IMPLANT PILOT DRILLING AND DEPTH CONTROL The pilot drill determines the depth and axis of the implant site. The depth marks on the drill correspond to the implant lengths 7, 9, 11 and 13 mm. The maximumdrilling depth is 16mm. For safety reasons, a depth stopmatching the proposed implant length should be used. Maximum speed: 800 rpm Once drilling is complete, the depth and axis of the implant bed is checked using the paralleling pins. If several implants are being placed, a paralleling pin is inserted into the first hole in order to align the other implant axes. The pilot drill is aligned parallel to the paralleling pin and visually checked from two planes (sagittal and transversal). Pilot drill Ø 2.0 mm max. 800 rpm Pilot drilling Depth control following pilot drilling Paralleling pin PROGRESSIVE-LINE 16 mm 13 mm 11 mm 9 mm 7 mm 0 SURGICAL PROCEDURE