CONELOG SCREW-LINE surgical procedures

10 CONELOG ® SCREW-LINE IMPLANT 2.5 mm external diameter 10 mm 4 mm Example: CT-tubes for CT planning for pilot drill Ø 2.0 mm Drill for placement of CT-tubes 2.1 mm internal diameter X-RAY/DRILLING TEMPLATE WITH CT-TUBES FOR CT PLANNING CT-tubes for the CT planning are integrated at the suitable implant posi- tions in the planning templates created from the wax-up/set-up and are used as reference positions in the X-ray image. The CT-tubes have two parts, and are made of titanium as this material does not cause any scattering of rays in the CT/DVT. The lower section is polymerized into the template. The upper section is pluggable. The entire CT-tube is used for the radiological diagnostics; the upper section can be removed for surgery. Depending on the software used for the evaluation, titanium CT-tubes or other radio- opaque positioning elements (e.g. steel, barium sulfate) are integrated for the CT/DVT-supported planning. Placing the CT-tubes directly on the mucosa makes it possible to determine their density in the CT/DVT. The documentation included with these systems contains more information on this topic. ORTHOPANTOMOGRAM X-Ray planning foils are available in 1.25:1 and 1.4:1 scales for all implant types to check the dimensions on the orthopantomogram. The foil magni- fications match the delay factors for most orthopantomographs. However, they should be considered only as approximations in implant dimensioning. The self-adhesive implant planning films (X-Ray Transfer pictures, scale 1.25:1) for the specific implant type can be attached to the proposed im- plant positions on the orthopantomograph film. +E219C530090101C +$0010028300CK IMPLANT POSITION PLANNING