CONELOG SCREW-LINE surgical procedures

21 CONELOG ® SCREW-LINE IMPLANT PRE-DRILLING AND CONTROL AXIS ALIGNMENT A tapered pre-drill SCREW-LINE with a coronal diameter of 2.8 mm and api- cal diameter of 1.7 mm is available for the SCREW-LINE configuration. Recommended drilling speed: 600 rpm The depth marks on the drill match the implant lengths 7, 9, 11 and 13 mm. The maximum drilling depth is 16 mm. For safety reasons, a depth stop mat- ching the proposed implant length should be used. Further drilling is perfor- med with the form drills. The axis alignment is controlled with the paralleling pin. 2.8 mm 2.8 mm 1.7 mm 1.7 mm Pre-drill SCREW-LINE: Ø 1.7–2.8 mm, 600 rpm Pre-drilling Control of axis alignment Paralleling pin SCREW-LINE 2.0 mm