CONELOG SCREW-LINE surgical procedures

25 CONELOG ® SCREW-LINE IMPLANT Tapping in the upper region of the implant bed TAPPING All CONELOG ® SCREW-LINE implants come with a self-tapping thread. Use of a tap is recommended for bone quality categories 1 [A] and 2 [A] . The maximum speed must not exceed 15 rpm when performing poweras- sisted tapping. We recommend manual tapping. Tap SCREW-LINE, with hexagon, max. 15 rpm Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm Ø 5.0 mm Locked torque wrench Manual tapping is performed with tap adapters for the tap SCREW- LINE and the locked torque wrench. Make sure to pay attention to the axial di- rection of the implant bed when inserting and removing the tap. The limit for insertion of the tap is the upper edge of the cutting blade. Tap adapter, short and long, for tap SCREW-LINE [A] See section «Further documentation» on page 42