Temporary Abutments for Crown and Bridge Restorations

6 TEMPORARY ABUTMENTS FOR CROWN AND BRIDGE RESTORATIONS TEMPORARY BRIDGE RESTORATIONS CONELOG ® Temporary abutments without apical taper/grooves are avail- able for bridge restorations. In case of splinted abutments, the design thus enables bridging of implant axis divergences of up to 30° (15° per implant). CONELOG ® Temporary abutments for bridges are marked with the corre- sponding implant diameter and a triangle for better identification. CONELOG ® Temporary abutment, crown, with tapered implant-abutment connection, titanium alloy, incl. CONELOG ® Abutment screw ART. NO. C2239.3300 C2239.3800 C2239.4300 C2239.5000 Implant Ø in mm 3.3 3.8 4.3 5.0 Prosthetic height in mm 11.0 11.0 11.0 11.0 CONELOG ® TEMPORARY ABUTMENTS, TITANIUM ALLOY, CROWN AND BRIDGE VERSIONS TEMPORARY CROWN RESTORATIONS For fabricating crown restorations, the CONELOG ® Temporary abutments are available with tapered implant-abutment connection and three grooves for positioning/as antirotational mechanism. Temporary abutments for crowns are color-coded to match the implant diam- eter and are available for all CONELOG ® Implant diameters. NOTE These abutments are not suitable for single crown restorations. Limited indications apply to abutments with Ø 3.3 mm, these are given in the corresponding instruction manual. NOTE These abutments are not suitable for bridge restorations. CONELOG ® Temporary abutment, bridge, without tapered implant-abutment connection, titanium alloy, incl. CONELOG ® Abutment screw ART. NO. C2339.3300 C2339.3800 C2339.4300 C2339.5000 Implant Ø in mm 3.3 3.8 4.3 5.0 Prosthetic height in mm 11.2 11.2 11.2 11.2 The prosthetic height is the distance between the implant shoulder surface up to the occlusal abutment edge of the CONELOG ® Abutment screwed into the CONELOG ® Implant.