Titanium Bases CAD/CAM Crown and Bridge Restorations

4 TITANIUM BASES CAD/CAM FOR CROWN AND BRIDGE RESTORATIONS BRIDGE RESTORATIONS CAMLOG ® Titanium bases CAD/CAM without Tube-in-Tube ® Implant-abut- ment connection are available for bridge restorations. In case of splinted titanium bases, the design thus enables bridging of implant axis divergences of up to 30° (15° per implant). CAMLOG ® Titanium bases for bridges are marked with the corresponding implant diameter and two parallel markings for better identification. The shoulder height for all implant diameters is 0.4 mm. NOTE These abutments are not suitable for single crown restorations. Limited indications apply to abutments with Ø 3.3 mm, these are given in the cor- responding instruction manual. CAMLOG ® Titanium base CAD/CAM, bridge, without Tube-in-Tube ® Implant-abutment connection, titanium alloy, incl. CAMLOG ® Abutment screw and white bonding aid (POM) ART. NO. J2344.3348 J2344.3848 J2344.4348 J2344.5048 J2344.6048 Implant Ø in mm 3.3 3.8 4.3 5.0 6.0 Shoulder height in mm 0.4 0.4 0.4 0.4 0.4 Prosthetic height in mm 4.4 4.4 4.4 4.4 4.4 The prosthetic height is the distance between the implant shoulder surface up to the occlusal abutment edge.