Titanium Bases CAD/CAM Crown and Bridge Restorations

6 TITANIUM BASES CAD/CAM FOR CROWN AND BRIDGE RESTORATIONS BRIDGE RESTORATIONS CONELOG ® Titanium bases CAD/CAM without apical taper/grooves are available for bridge restorations. In case of splinted titanium bases, the design thus enables bridging of implant axis divergences of up to 30° (15° per implant). CONELOG ® Titanium bases for bridges are marked with the corresponding implant diameter and a triangle for better identification. CONELOG ® Titanium base CAD/CAM, crown, with tapered implant-abutment connection, titanium alloy, incl. dark purple anodized CONELOG ® Abutment screw and black bonding aid (POM) ART. NO. C2242.3308 C2242.3320 C2242.3808 C2242.3820 C2242.4308 C2242.4320 C2242.5008 C2242.5020 Implant Ø in mm 3.3 3.3 3.8 3.8 4.3 4.3 5.0 5.0 Gingival height in mm 0.8 2.0 0.8 2.0 0.8 2.0 0.8 2.0 Prosthetic height in mm 5.5 6.7 5.5 6.7 5.5 6.7 5.5 6.7 CONELOG ® Titanium base CAD/CAM, bridge, without tapered implant-abutment connection, titanium alloy, incl. dark purple anodized CONELOG ® Abutment screw and black bonding aid (POM) ART. NO. C2342.3308 C2342.3320 C2342.3808 C2342.3820 C2342.4308 C2342.4320 C2342.5008 C2342.5020 Implant Ø in mm 3.3 3.3 3.8 3.8 4.3 4.3 5.0 5.0 Gingival height in mm 0.8 2.0 0.8 2.0 0.8 2.0 0.8 2.0 Prosthetic height in mm 5.0 6.2 5.0 6.2 5.0 6.2 5.0 6.2 The prosthetic height is the distance between the implant shoulder surface up to the occlusal abutment edge of the CONELOG ® abutment screwed into the CONELOG ® implant. NOTE These abutments are not suitable for single crown restorations. Limited indications apply to abutments with Ø 3.3 mm, these are given in the corresponding instruction manual.