7
THE CONELOG
®
IMPLANT SYSTEM
SYSTEM INFORMATION
CONELOG
®
IMPLANTATSYSTEM
CONELOG
®
Titanium base CAD/CAM
The CONELOG
®
Titanium base CAD/CAM enables restorations
on CONELOG
®
Implants with individual and highly precise
two-piece abutments made from zirconium oxide, titanium or
cast alloy. The base is available in the gingival heights 0.8 and
2.0 mm and is used as a bonding base for individual, implant-
supported reconstructions such as mesostructures as well as
crown, bridge and double-crown restorations.
CONELOG
®
Logfit
®
Abutments
The Logfit
®
Prosthetic System enables the fabrication of
cement-retained crown and bridge restorations. The Logfit
®
Prosthetic System consists of color-coded CONELOG
®
Logfit
®
Abutments with two gingival heights (1.0 and 2.5 mm),
Logfit
®
Impression caps, Logfit
®
Analogs and Logfit
®
Burn-
out plastic copings with and without rotation protection for
the manufacture of cast crown and bridge reconstructions.
CONELOG
®
Vario SR abutments
CONELOG
®
Vario SR abutments are available in straight, in
20° and 30° angled versions. These abutments can compen-
sate for large implant axis divergences. Prefabricated Vario SR
prosthetic components make fabrication of occlusally screw-
retained crown, bridge and bar restorations possible. Burn-
out plastic copings can be used to fabricate casted crown
and bridge restorations. The titanium caps have a retention
surface on the outside and are designed for temporary or final
bridge restorations made of plastic. Titanium bases for bars
are available for laser-welded bar restorations.
IMPORTANT NOTE
Because of the conical inner configuration of the
CONELOG
®
SCREW-LINE Implants, they are only
compatible with CONELOG
®
Components.
CONELOG
®
DISCONNECTOR FOR
CONELOG
®
ABUTMENTS
The CONELOG
®
Disconnector for CONELOG
®
Abutments is
used to remove or decouple CONELOG
®
Abutments from the
CONELOG
®
Implants/Lab analogs. If the abutment does not
come loose, the torque wrench (locked setting) can be placed
on the disconnector and the abutment can be loosened by
turning clockwise.
CONELOG
®
Universal and Telescope abutment
The CONELOG
®
Universal and Telescope abutments can be
used for individually fabricated cementable crown and bridge
restorations and for telescopic crown restorations. The abut-
ments are made of titanium alloy and can be custom trimmed.
CONELOG
®
Bar-, Ball- and Locator
®
Abutments
For the CONELOG
®
Implant System, CONELOG
®
Bar, Ball,
and Locator
®
Abutments are available in different gingival
heights for anchoring of implant-retained full prostheses. For
CONELOG
®
Bar abutments, there are several bases available
for burn-out, cast-on, soldering, and laser-welding techniques.
CONELOG
®
Bar-, Ball- and Locator
®
Abutments are perfectly
suited for movable anchorings of full prostheses.
CONELOG
®
Bar, Ball and Locator
®
Abutment