4 / 92
2
THE CONELOG
®
IMPLANT SYSTEM
SYSTEM INFORMATION
CONELOG
®
IMPLANTATSYSTEM
GENERAL SYSTEM INFORMATION ABOUT THE
CAMLOG
®
AND CONELOG
®
IMPLANT SYSTEM
The CONELOG
®
Implant System is based on the many years of
clinical and laboratory experience with the CAMLOG
®
Implant
System. The CONELOG
®
Implant System is a user-friendly,
consistently prosthesis-oriented implant system.
All CAMLOG
®
and CONELOG
®
Products are continuously fab-
ricated based on the latest state of technology. The CAMLOG
®
and CONELOG
®
Implant System was progressively enhanced
through in-house research and development in collaboration
with hospitals, universities and dental technicians. Today, it
represents the state of the art in implant dentistry.
The CAMLOG
®
Implant System is well documented scientifi-
cally. Numerous studies based on various parameters, e. g.
implant surface, time of implantation and/or implant loading,
primary stability, connection design or type of superstruc-
ture, support this. The long-term outcomes for the CAMLOG
®
Implant System are persuasive.
NEW PRODUCTS
GUIDE SYSTEM
The CAMLOG
®
Guide System for template-guided implant
bed preparation and insertion has been extended by the
CONELOG
®
SCREW-LlNE Implants and is now called Guide
System.
Guide System CONELOG
®
SCREW-LlNE Implants are available
with a 3.3 mm diameter in the lengths 9, 11, 13 and 16 mm
as well as with 3.8 and 4.3 mm diameters in the lengths 7, 9,
11, 13 and 16 mm.
Newly available are guided pilot drills and a driver with ISO
shaft for Guide System implants. The form drills were fitted
with a four-edged cutting geometry with chip grooves to pro-
vide greater smoothness of operation. The guiding sleeves
were shortened by 1 mm for minimally invasive implantation
at greater gingival thickness, provided with opposing bevels
for use in narrow tooth gaps and fitted with a marking to
give better groove alignment. The template drills are fitted
newly with a spiral-shaped cutting edge and a longer shaft.
All drills, gingiva punches, insertion posts and guiding sleeves
are color-coded throughout.
The new Guide System comprises 85 items.
LOCATOR
®
A new replacement male is available for the Locator
®
Anchoring system for extended range without retention. The
replacement male is colored gray and serves to adapt the
cumulated retention force of a Locator
®
retained prosthesis
on implants with diameters 3.8/4.3/5.0 mm.
CONELOG
®
SCANPOSTS FOR SIRONA SCANBODY
In conjunction with the Sirona Scanbodies the new
CONELOG
®
ScanPosts serve for the digital recording of the
implant position or laboratory analog position in relation to
the remaining teeth and the soft tissue.
CONELOG
®
TITANIUM BASE CAD/CAM
In future, the Sirona inCoris ZI meso blocks can also be used
with the CONELOG
®
Implant System. The newly modified
CONELOG
®
Titanium base CAD/CAM, including the dark
purple, anodized abutment screw and a bonding aid, will be
available in the gingival heights 0.8 mm and 2.0 mm from
September 2014 with a new article number.