CAMLOG Hybrid Restorations

52 HYBRID RESTORATIONS WITH THE CAMLOG ® IMPLANT SYSTEM LOCATOR ® ANCHORING SYSTEM PRODUCT DESCRIPTION The Locator ® anchoring system is intended for use in the tissue-borne and implant-retained prosthesis for resilient supported full dentures in the max- illa and mandible. The system can be used with implant divergences of up to 20° per implant (3.3 mm diameter CAMLOG ® Locator ® abutment – up to 10° divergence per implant). The self-aligning design of the Locator ® anchoring system supports the patient when inserting and seating the pros- thesis. The design of the CAMLOG ® Locator ® abutment and replacement males provide double (dual) retention. The Locator ® anchoring system contains various replacement males with different retention forces. The CAMLOG ® Locator ® abutments are avail- able for implant diameters 3.3 mm in three gingival heights (1.0, 2.0 and 3.0 mm), and for implant diameters 3.8, 4.3 and 5.0 mm in four gingival heights (1.0, 2.0, 3.0 and 4.0 mm). The Locator ® anchoring system can also be integrated in a full denture sup- ported on CAMLOG ® implants: • For the fabrication of a new full denture with Locator ® retention components • Converting an existing full denture into a Locator ® -retained denture High functional area 1.52 mm Diameter of the functional area 3.8 mm Gingival height CAMLOG ® implant Dual retention Dual retention by a stamp in the replacement males and circular undercut of the CAMLOG ® Locator ® abutment CAMLOG ® Locator ® abutment