CAMLOG Vario SR Prosthetics Components

CAMLOG ® VARIO SR PROSTHETIC COMPONENTS VARIO SR PROTECTION CAPS Vario SR protection caps can be used for the initial restoration as the final prosthetic restoration is being fabricated. Vario SR protection caps are made of titanium alloy, are one piece, sterile packed and each available in 3.8/4.3 mm and 5.0/6.0 mm diameters. Vario SR protection caps are screwed directly onto the CAMLOG ® Vario SR abutments (straight/angled) attached definitively to the CAMLOG ® im- plant. The caps are picked up with a screwdriver (hex) and screwed in hand-tightened. NOTE During intraoral use, products must be secured in general against aspi- ration and swallowing. NOTE If an existing prosthesis is used as a temporary restoration, it must be hollow ground in the areas of the Vario SR protection caps. The prosthe- sis must not lie on the Vario SR protection caps and thus compromise implant healing by transferring mastication forces. ART. NO. ARTICLE FOR IMPLANT DIAMETERS J2568.4300 Vario SR 3.8/4.3 mm protective cap J2568.6000 Vario SR 5.0/6.0 mm protective cap TEMPORARY RESTORATIONS Height 6.0 mm