CONELOG PROGRESSIVE-LINE Surgical procedures

21 CONELOG ® PROGRESSIVE-LINE IMPLANT FORM DRILLING Diameter- and length-specific form drills are available for each implant size. The form drills are color-coded and laser-marked. The form drills included in the surgery sets are supplied with a color- coded, removable depth stop. Form drill PROGRESSIVE-LINE Drill sequence in ascending order to the drill hole expansion up to the defined implant diameter. Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm Ø 5.0 mm Depending on the specified drilling depth (implant length), the hole diameter is expanded progressively with the series of form drills until the intended implant diameter is achieved. The small graduations in diameter achieve a gentle preparation of the bone. Maximum speeds: Ø 3.3 mm, 550 rpm Ø 3.8 mm, 500 rpm Ø 4.3 mm, 400 rpm Ø 5.0 mm, 350 rpm PERFORMING FORM DRILLING (STANDARD DRILLING SEQUENCE) Performing form drilling using CONELOG ® PROGRESSIVE-LINE Implants of size Ø 4.3/13 mm as an example: 1. Form drill Ø 3.3/13 mm with depth stop, 2. Form drill Ø 3.8/13 mm with depth stop, 3. Form drill Ø 4.3/13 mm without depth stop (final form drilling). 9 mm 7 mm 11 mm 13 mm 16 mm Longueur