CONELOG SCREW-LINE surgical procedures

3 CONELOG ® SCREW-LINE IMPLANT CONELOG ® SCREW-LINE IMPLANT PROMOTE ® PLUS GENERAL CONELOG ® SCREW-LINE implants are endosseous implants available in va- rious lengths and diameters. They are surgically inserted in the bone of the maxilla and/or mandible and serve as an anchor for functional and esthetic oral restorations for partially and fully edentulous patients. The prosthetic restoration is performed with single crowns, bridges or full dentures that are attached to the CONELOG ® Implants with the appropriate CONELOG ® Components. CONELOG ® SCREW-LINE implant, Promote ® plus are distin- guished by: • a conical implant/abutment connection, • the Promote ® surface, • standard integrated Platform Switching, • a machined implant shoulder surface, • a slightly tapered external geometry and • efficient implant handling with mounted insertion post. The CONELOG ® SCREW-LINE implant, Promote ® plus is not only suitable for late implantations but also for immediate or delayed immediate implan- tations in maxillary and/or mandibular bone. The selected healing tech- nique can be either submerged or transgingival. In the case of a one-stage surgical procedure, the implants can be loaded immediately if good primary stability has been achieved and functional loading is appropriate. The CONELOG ® SCREW-LINE implant, Promote ® plus has an acid-etched, tapered implant shoulder (45°). The implant is easily inserted because the taper of the implant body (3°–9° depending on length and diameter) in- duce self centering. The self-cutting thread provides for continuous grip on the bone and high primary stability. RANGE OF USE FOR CONELOG ® SCREW-LINE IMPLANTS A more deeply positioned coronal implant shoulder is recommended parti- cularly where a high-esthetic outcome is important. The CONELOG ® SCREW-LINE implant, Promote ® plus is suited for this situation. The fol- lowing clinical conditions facilitate the process: • Normal to thick biotype, • Gingival height of at least 3.0 mm, • Minimum width of 1.0 mm of the attached gingiva, • Minimum distance of 2.0 mm between attached gingiva and mimetic musculature. Abrasive-blasted, acidedged Promote® Surface (Micro-Macro surface) Machined implant shoulder surface CONELOG ® SCREW-LINE implant, Promote ® plus Acid-etched tapered implant shoulder (45°) Height: 0.1–0.2 mm (variable according to implant Ø) CONELOG ® Abutment CONELOG ® Abutment screw Conical CONELOG ® Implant abutment connection CONELOG ® SCREW- LINE implant CONELOG ® Groove/ cam design CONELOG ® Abutment guide in the CONELOG ® Implant Integrated platform switching CONELOG ® Implant inner thread