CONELOG SCREW-LINE surgical procedures

4 CONELOG ® SCREW-LINE IMPLANT MATERIALS All CONELOG ® Implants are made of titanium grade 4. The CONELOG ® Abutments and abutment screws are made of titanium alloy Ti6Al4V ELI. PRODUCT PRECISION For the most part, the inner and outer geometry of the CONELOG ® Implants and abutments are rotary machined. As a result, the tolerances can be kept very small as well as excellent component precision without impacting the material structure. The CONELOG ® Implant abutment connection ensures a very precise, stable and rotation-resistant connection to the CONELOG ® Prosthetic components. INNER CONFIGURATION OF THE IMPLANT CONELOG ® SCREW-LINE implants are equipped with a cone (7.5°) and three grooves in the inner configuration for positioning CONELOG ® Abut- ments. The CONELOG ® Abutments are equipped with an apical cone and three cams which will lock into the tapered connection and the three grooves of the implant. The CONELOG ® Abutment does not cover the implant shoulder. A CONELOG ® Abutment screw is used to fix CONELOG ® Abutments in the CONELOG ® SCREW-LINE implant with a defined torque. For optimal positioning of the abutments in the implant, they should be aligned in the bone so that one of the three grooves points vestibularly. The drivers include markings on the outside that correspond to the three grooves of the CONELOG ® Implant inner configuration. Conical CONELOG ® Implant abutment connection Groove/cam design of the CONELOG ® Implant abutment connection 7.5° conical connection CONELOG ® SCREW-LINE IMPLANT PROMOTE ® PLUS